Many products for you to choose from
G0306 Modbus to Profibus DP Converter
Modbus to Profibus DP Converter realizes the conversion function from Modbus RTU to PROFIBUS DP, making multiple slave station devices that conform to Modbus RTU communication regulation access to PROFIBUS DPnetwork. Modbus can be as master or slave, and this function can be realized by a special function button.
G0306 Modbus to Profibus DP Converter:
1.Modbus-RTU protocol to DP protocol
2.Standard DP interface, baud rate self-adapting, support up to 12Mbps
3.Support up to 244 byte input/output
4.Configure Modbus communication parameters by GSD
5.Modbus side can be both master and slave station
Product Description
G0306 Modbus to Profibus DP Converter realizes the conversion function from Modbus RTU to PROFIBUS DP, making multiple slave station devices that conform to Modbus RTU communication regulation access to PROFIBUS DPnetwork. Modbus can be as master or slave, and this function can be realized by a special function button.
Outline dimension drawing of G0306 Modbus to Profibus DP converter:
Unit: mm
Structure diagram of G0306 Modbus to Profibus DP converter :
1 | film | 2 | Upper cover | 3 | Interface board | 4 | Hexagona l prisms |
5 | Wide brim screw | 6 | Iron wire | 7 | clip | 8 | Wide brim screw |
9 | base | 10 | Communi cation board |
Schematic diagram of G0306 Modbus to Profibus DP converter :
Detailed data list of G0306 Modbus to Profibus DP converter:
Basic parameters:
Working Voltage | 24VDC(±20%) |
Rated Current | I24V:≤60mA |
Working Temperature | -20℃~70℃ |
Storage Temperature | -40℃~70℃ |
Humidity Range | 5%~95%RH |
Modbus Physical Interface | RS485 (Configurable Terminal)/ RS232 |
Modbus Character Transfer Mode | RTU Mode |
Performance:
Protection Grade | IP20 for outer case grade |
Electromagnetic Compatibility | Complied with GB/T 18268.1-2010 FF Terminal Test Method is Complied with GB/T 18268.23-2010 |
<< Previous page
Next page >>