Many products for you to choose from
MC0310 Modbus to HART Built-in Core Module
MC0310 Modbus to HART Built-in Core Module is one of the M series built-in modules developed by Microcyber. The MC0310 is designed to convert a Modbus slave device into a HART slave device by embedding it into a user device with Modbus RTU communication capability.
MC0310 Modbus to HART Built-in Core Module:
1. Comply with HART 7.0 protocol standard
2. Comply with the standard Modbus-RTU protocol
3. Support dynamic configuration of Modbus communication parameters
4. Support 6 device variables, 4 dynamic variables
Product Description
MC0310 Modbus to HART built-in core module is one of the M series built-in modules developed by Microcyber. The MC0310 is designed to convert a Modbus slave device into a HART slave device by embedding it into a user device with Modbus RTU communication capability.
Outline dimension drawing of MC0310 Modbus to HART built-in core module :
Principle diagram of MC0310 Modbus to HART built-in core module :
Detailed data list of MC0310 Modbus to HART built-in core module :
Details | Index |
Bus Power | 11.9~35V |
Bus Interface | 2-wire system 4-20mA+HART |
Modbus Interface | TTL (Support MODBUS RTU Master Station Protocol) |
Isolation | The Bus is not isolated from the Modbus interface |
Display | N |
Temperature Range | (-40~85) ℃ |
Humidity Range | (5~95)%RH |
Storage Temperature | -40 ~ 85℃ |
Start Time | ≤5 Seconds |
Update Time | 0.2s |
Damping Adjustment | Time constant 0 ~ 32 seconds |
Alerting Signal | High and low alarm current 21.75mA/3.7mA; Upper/lower limit current 20.8mA/3.8mA |
Current Accuracy | 0.03%FS (normal temperature) |
Current Temperature Drift | 50PPM/℃ |
Intrinsic Safety Level | Ex ia IIC T4/T6 Ga |
Electromagnetic Compatibility | Combined with the baseplate, the device can be designed to meet the following requirements: In line with GB/T 18268.1-2010 "Measurement, control and laboratory electrical equipment electromagnetic compatibility requirements Part 1: General requirements" in the industrial site immunity requirements |
<< Previous page
Next page >>