Home
/
Product
/
Smart Temperature Transmitters
/
DIN Rail Mounted Temperature...

DIN Rail Mounted Temperature Transmitters

Microcyber’s DIN Rail Mounted Smart Temperature Transmitters are versatile, high-accuracy devices engineered for centralized temperature monitoring and signal conversion in industrial control systems. Designed for easy installation on standard DIN rails inside panels or cabinets, they accept universal inputs from thermocouples, RTDs (Pt100, Pt1000, etc.), resistance, and millivolt sources, delivering standardized outputs including 4-20mA, HART, Foundation Fieldbus (FF), Profibus PA, Modbus, and WirelessHART protocols.

Key benefits include:

Modular DIN rail mounting:space-saving and scalable for multi-channel applications
Superior accuracy and long-term stability:reliable performance in challenging conditions
Advanced digital communication:supporting remote configuration, diagnostics, and asset management
High isolation and explosion-proof certifications:ensuring safety in hazardous areas
Broad compatibility:seamless integration with various sensors and DCS/PLC systems

Widely applied in petrochemical, pharmaceutical, power generation, food & beverage, and manufacturing industries, these transmitters minimize wiring complexity, lower installation costs, and enhance process efficiency. Select from our models below to meet your specific requirements.

NCS-TT108F Rail Mounted Multi-Input FF Temperature Transmitter

Supports RTD, TC, mV, Ω FF protocol compliant
8 channels; 2-wire/3-wire RTD connection supported
FISCO certified; safe operation in hazardous zones

NCS-TT106H-R1 Rail Mounted HART Temperature Transmitter

Converts RTD/TC signals to 4-20mA & HART output.
Single-channel input with open/short detection.
Intrinsically safe for use in hazardous areas.

NCS-TT106F-R1 Rail Mounted FF Temperature Transmitter

Supports RTD/TC inputs via Foundation Fieldbus.
Single-channel input with open/short detection.
FISCO compliant for safe use in hazardous areas.

NCS-TT108FC Rail Mounted Multi-Input FF Temperature Transmitter

Supports RTD, TC, mV, Ω FF protocol compliant
8 channels; 2/3-wire RTD + LCD & local keypad configuration
FISCO certified; safe in hazardous areas

NCS-TT108M Rail Mounted Multi-Input Modbus Temperature Transmitter

Supports RTD, TC, mV, Ω Modbus-RTU protocol compliant
8 channels 2/3-wire RTD connection supported
LCD display & local configuration via keypad

NCS-TT106H-R Rail Mounted HART Temperature Transmitter

Supports RTD/TC/Res/Volt, outputs 4-20mA & HART.
Dual-channel, 6-terminal design for flexible inputs.
Features 1000VAC input-to-output isolation.

NCS-TT108F Rail Mounted Multi-Input FF Temperature Transmitter

Supports RTD, TC, mV, Ω; FF protocol compliant
8 channels; 2-wire/3-wire RTD connection supported
FISCO certified; safe operation in hazardous zones

NCS-TT108P Rail Mounted Multi-Input PA Temperature Transmitter

Supports RTD, TC, mV, Ω; PROFIBUS PA 3.02 protocol
8 channels; 2-wire/3-wire RTD supported
FISCO certified; suitable for hazardous zones

NCS-TT108PC Rail Mounted Multi-Input PA Temperature Transmitter

RTD, TC, mV, Ω input,PROFIBUS PA 3.02 protocol
8 channels 2/3-wire RTD + LCD & keypad config
FISCO certified, suitable for hazardous zones

NCS-TT306H-R Rail Mounted HART Temperature Transmitter

Dual-channel RTD/TC/Ohm/mV to 4-20mA & HART
NE107 compliant sensor & hardware fault detection
Certified to SIL2/SIL3 per IEC 61508 standard

NCS-TT306H-R1 Rail Mounted HART Temperature Transmitter

Single-channel RTD/TC/Ohm/mV to 4-20mA & HART
NE107 compliant sensor & hardware fault detection
Certified to SIL2/SIL3 per IEC 61508 standard

NCS-TT108N Rail Mounted Multi-Input PN Temperature Transmitter

Supports RTD, TC, mV, Ω: PROFINET protocol compliant
8 channels; 2/3-wire RTD connection supported
LCD display & local configuration via keypad

Product Recommendations

G0310 Modbus to HART Gateway

NCS-IF105P Current to Profibus PA Converter

NCS-TT106A Head Mount 4-20mA Temperature Transmitter

NCS-TT306HH Head Mount HART Temperature Transmitter