M0310 Modbus to HART embedded module is one of the Microcyber M series embedded modules developed by Microcyber Corporation. By embedding M0310 into the user device with Modbus RTU communication capability, the Modbus slave can be transformed into a HART slave.

M0310 Modbus to HART embedded Module：

1.Comply with HART V7.0 protocol standard 

2.Comply with standard Modbus RTU protocol

3.Support Modbus communication parameters dynamic configuration

4.Support 6 device variables and 4 dynamic variables

5.M0310-ACT is an actuator-specific version and different from M0310 hardware

M0306 Modbus to Profibus DP embedded module is one of the Microcyber M-series embedded modules developed by Microcyber Corporation. This series of embedded modules have features like same size, same interface, easy to upgrade, easy configuration and so on, it is the ideal choice for users to quickly develop the fieldbus device.

M0306 Modbus to Profibus DP embedded module：

1.Modbus-RTU master station, PROFIBUS DP slave station

2.Comply with PROFIBUS DPV0 protocol standard

3.Electrical interface connected with Modbus-RTU slave is TTL level

4.Can set PROFIBUS DP slave station address via DIP switch

5.Same hardware,M0006 custom protocol to Profibus DP module

M0307 Modbus to Profibus PA embedded module is one of the Microcyber M-series built-in modules developed by Microcyber Corporation. By embedding the M0307 into the users’ device with Modbus-RTU communication capabilities, the user device can be changed to Profibus PA slave station. 

M0307 Modbus to Profibus PA embedded module：

1.Comply with PA 3.02 specification

2.Support Modbus communication parameters dynamic configuration

3.Support function block AI, AO, DI, DO, PID, etc.

4.Support up to 4 channels AI, AO, DI, DO

M0313 Modbus to Foundation Fieldbus embedded module is one of the Microcyber M-serise modules, By embedding the M0313 into the users’ device with Modbus-RTU communication capabilities, the user device can be changed to Foundation Fieldbus slave station. 

M0313 Modbus to Foundation Fieldbus embedded module：

1.Comply with FF protocol standard

2.Support Modbus-RTU communication parameters dynamic configuration

3.Support function blocks AI, AO, DI, DO, PID, etc.

4.Support ITK 6.1.1

MC0310 Modbus to HART Built-in Core Module is one of the M series built-in modules developed by Microcyber. The MC0310 is designed to convert a Modbus slave device into a HART slave device by embedding it into a user device with Modbus RTU communication capability.

MC0310 Modbus to HART Built-in Core Module:

1. Comply with HART 7.0 protocol standard

2. Comply with the standard Modbus-RTU protocol

3. Support dynamic configuration of Modbus communication parameters

4. Support 6 device variables, 4 dynamic variables

MC0313 Modbus to Foundation Fieldbus built-in core module is a built-in conversion module of Modbus RTU protocol and FF protocol developed by Microcyber Corporation. It is one of the Microcyber’s M series built-in core modules. The MC0313 Modbus to FF built-in core module, as a Modbus host, communicates with the device with Modbus RTU communication function through TTL interface, and can convert the data in the device to FF device variable .

MC0313 Modbus to Foundation Fieldbus Built-in Core Module:

1. Comply with Foundation Fieldbus protocol standards

2. Modbus-RTU communication parameter dynamic configuration

3. Support multiple function blocks such as AI, AO, DI, DO and PID

4. Support ITK6.4

MC0307 Modbus to Profibus PA Built-in Core Module is one of the Microcyber M series embedded core board modules developed by Microcyber Corporation. The MC0307 Modbus to PA built-in core board module, as a Modbus host, communicates with the device with Modbus-RTU communication function through TTL interface, which can convert the Modbus slave device into a PROFIBUS PA slave device.

MC0307 Modbus to Profibus PA Built-in Core Module：

1. Small size, 35mm*35mm

2. Comply with PA profile 3.02

3. Support dynamic configuration of Modbus-RTU communication parameters

4. Support AI, AO, DI and DO function blocks

5. Support customization and development

MC0312 Modbus to HART-IP Built-in Core Module is a 10BASE-T1L (IEEE 802.3cg) compliant miniaturised module developed by Microcyber, supporting bus power supply, communication rate of 10Mbps, and a maximum communication distance of 1000 m. MC0312 Modbus to HART-IP Built-in Core Module the software protocol supports Modbus-RTU master and HART-IP slave functions, which can quickly upgrade the user's Modbus devices to HART-IP protocol devices that support APL physical layer.

MC0312 Modbus to HART-IP Built-in Core Module：

1. Conform to HART 7.9 protocol standard

2. Support 10BASE-T1L (IEEE802.3cg) standard

3. Support Ethernet-APL 2-wireEthernet physical layer

4. Support HART-IP slave and Modbus master

5. Support 1 Modbus slave device