G0313 Modbus to Foundation Fieldbus Converter is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to Foundation Fieldbus converter communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to Foundation Fieldbus device variable output.

G0313 Modbus to Foundation Fieldbus Converter ：

1.Modbus-RTU protocol to Foundation Fieldbus protocol

2.Comply with Foundation Fieldbus standard

3.Support LinkMaster function

4.Support standard DD specification

5.Support up to four Modbus devices

G0307 Modbus to Profibus PA converter realizes the converter function from Modbus RTU to PROFIBUS PA, and it shall multiple devices with Modbus RTU protocol to PROFIBUS PA network.

G0307 Modbus to Profibus PA converter：

1.  Modbus-RTU protocol to PROFIBUS PA protocol

2. Support PA profile 3.02

3. Support GSD 5.0 specification and standard EDD specification

4. Support AI, AO, DI, DO standard function block

5. Support up to four Modbus devices

Modbus to Profibus DP Converter realizes the conversion function from Modbus RTU to PROFIBUS DP, making multiple slave station devices that conform to Modbus RTU communication regulation access to PROFIBUS DPnetwork. Modbus can be as master or slave, and this function can be realized by a special function button.

G0306 Modbus to Profibus DP Converter：

1.Modbus-RTU protocol to DP protocol

2.Standard DP interface, baud rate self-adapting, support up to 12Mbps

3.Support up to 244 byte input/output

4.Configure Modbus communication parameters by GSD

5.Modbus side can be both master and slave station

G0310 Modbus to HART Converter designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It can convert device data to HART device variables output, and it also supports 4~20mAcurrent output. 

G0310 Modbus to HART Converter：

1.Modbus-RTU protocol to HART protocol

2.Support 6 device variables and 4 dynamic variables

3.Support Modbus communication parameters dynamic configuration

4.Support HART multipoint mode

5.Support 375/475 communicator

G1003 HART to Modbus converter realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the converter, HART terminal is master station, Modbus terminal is slave station.

G1003 HART to Modbus Converter：

1.HART protocol to Modbus-RTU/ASC II protocol

2.Hardware interface RS232/422/485

3.Configured as HART first master device or second master device

4.Can work in a point-to-point or multipoint mode

5.Connect up to 15 HART slave devices in multipoint working mode

6.Supported HART command can be configured

7.Support HART burst mode

G1013 HART To Foundation Fieldbus converter designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output. 

G1013 HART to Foundation Fieldbus Converter：

1.HART protocol to FF protocol

2.Support HART 7.0 protocol and backward compatible

3.Support up to 4 HART slave devices

4.Support 4 AI and 1 PID function block