M0313 Modbus to Foundation Fieldbus embedded module is one of the Microcyber M-serise modules, By embedding the M0313 into the users’ device with Modbus-RTU communication capabilities, the user device can be changed to Foundation Fieldbus slave station. 

M0313 Modbus to Foundation Fieldbus embedded module：

1.Comply with FF protocol standard

2.Support Modbus-RTU communication parameters dynamic configuration

3.Support function blocks AI, AO, DI, DO, PID, etc.

4.Support ITK 6.1.1

MC0310 Modbus to HART Built-in Core Module is one of the M series built-in modules developed by Microcyber. The MC0310 is designed to convert a Modbus slave device into a HART slave device by embedding it into a user device with Modbus RTU communication capability.

MC0310 Modbus to HART Built-in Core Module:

1. Comply with HART 7.0 protocol standard

2. Comply with the standard Modbus-RTU protocol

3. Support dynamic configuration of Modbus communication parameters

4. Support 6 device variables, 4 dynamic variables

MC0313 Modbus to Foundation Fieldbus built-in core module is a built-in conversion module of Modbus RTU protocol and FF protocol developed by Microcyber Corporation. It is one of the Microcyber’s M series built-in core modules. The MC0313 Modbus to FF built-in core module, as a Modbus host, communicates with the device with Modbus RTU communication function through TTL interface, and can convert the data in the device to FF device variable .

MC0313 Modbus to Foundation Fieldbus Built-in Core Module:

1. Comply with Foundation Fieldbus protocol standards

2. Modbus-RTU communication parameter dynamic configuration

3. Support multiple function blocks such as AI, AO, DI, DO and PID

4. Support ITK6.4

MC0307 Modbus to Profibus PA Built-in Core Module is one of the Microcyber M series embedded core board modules developed by Microcyber Corporation. The MC0307 Modbus to PA built-in core board module, as a Modbus host, communicates with the device with Modbus-RTU communication function through TTL interface, which can convert the Modbus slave device into a PROFIBUS PA slave device.

MC0307 Modbus to Profibus PA Built-in Core Module：

1. Small size, 35mm*35mm

2. Comply with PA profile 3.02

3. Support dynamic configuration of Modbus-RTU communication parameters

4. Support AI, AO, DI and DO function blocks

5. Support customization and development

MC0312 Modbus to HART-IP Built-in Core Module is a 10BASE-T1L (IEEE 802.3cg) compliant miniaturised module developed by Microcyber, supporting bus power supply, communication rate of 10Mbps, and a maximum communication distance of 1000 m. MC0312 Modbus to HART-IP Built-in Core Module the software protocol supports Modbus-RTU master and HART-IP slave functions, which can quickly upgrade the user's Modbus devices to HART-IP protocol devices that support APL physical layer.

MC0312 Modbus to HART-IP Built-in Core Module：

1. Conform to HART 7.9 protocol standard

2. Support 10BASE-T1L (IEEE802.3cg) standard

3. Support Ethernet-APL 2-wireEthernet physical layer

4. Support HART-IP slave and Modbus master

5. Support 1 Modbus slave device

HT1200M HART Fieldbus Modem is a low-power modem chip that can be used in HART devices, which only needs a small number of external components to complete the modulation and demodulation of HART signals.The HT1200M HART Fieldbus Modem is compatible with the SYM20C15 and HT20C15 and with ON OnSemi's A5191HRT and HT2015. 

HT1200M HART Fieldbus Modem：

1. Single chip, FSK modem (Semi-duplex 1200b/s)

2. Integrated receiving the circuit of band-pass filter and transmitting signal waveform shaping

3. External 460.8kHz crystal or ceramic filter

4. Working temperature: -40℃～85℃

5. Working current: ＜140uA(3.3V）

6. LQFP32 and PLCC28 package

APC3 is an ASICs chip for PROFIBUS DP intelligent slave station development. APC3 supports the DPV0 part of the PROFIBUS DP standard.

APC3 Fieldbus Communication Controller(DP)：

1. Working temperature: -40～85℃

2. Power supply voltage: 3.3V

3. Integrated 1.5KByte dual-port RAM

4. Compatible with SPC3LV

5. Pin definition is compatible with VPC3 in 2K mode

6. Automatic identification of 9.6Kbps~12Mbps baud rate

7. Support Intel and Motorola processor interface modes

8. LQFP44 package